Replacement for PARKER's HIROSS Air Compressor Filter Element

---

Send Inquiry

Replacement for PARKER's HIROSS Air Compressor Filter Element

004.006.010 / 007.009.016 / 015.020.022 / 024,030 / 035,045 / 060.072 / 090.110.135 / 120.151.205 / 150.180.250 / 200 / 240.280 / 300

Dolomann replacement for PARKER's HIROSS air compressor filter element is used for air purification and filtration, which can filter out water vapor, condensed water, atmospheric dust, mechanical impurities, oil mist and microorganisms in the air, and impenetrable impurities and oil stains, etc. will be blocked to ensure the purity of the air and make the system run normally.

After the air compressor precision filter has been used for a period of time, the replacement HIROSS precision filter needs to be replaced regularly. If it is not replaced for a long time, the problem will be greater than the cost of purchasing the precision filter element, and the loss outweighs the gain. Therefore, the precision filter element must be replaced regularly to ensure the production operation.

Dolomann replacement for HIROSS air compressor precision filter of PARKERadopts imported glass fiber to ensure the filtering effect and service life. It is wound by advanced automatic winding system. The filter material and sectional winding are placed neatly, with high strength, reliable performance, large filtration area, large flow rate and small resistance, and the efficiency can reach 99.9995, which can be applied to various occasions with requirements.

Air Compressor Precision Filter Element, air compressor Ultra-precision filter element

Features

• Good oil removal, dust removal and water removal effects.
• 100% made in Taiwan.
• All kinds of models are available, which are widely used in various filters.
• The material is made of metal and plastic, which is firm and light in structure and easy to replace.
• There are high requirements for product quality and stability.
• Use the glass imported from Germany.

Specification

• Grade C = C: The removal rate of oil (residual oil) is 0.003mg/m³ @ 20°C. 7 Bar g. Example 1: 004c = kh004c.
• Grade P = Q: Removal rate of particulate pollutants 3 (micron) Example 2: 004q = kh004p.
• Grade U = P: The removal rate of oil (residual oil) is 0.5mg/m³ @ 20°C. 7 Bar g. The removal rate of particulate pollutants with filtration accuracy is 1.0 (micron). Example 3: 004p = kh004u.
• Grade H = S: The removal rate of oil (residual oil) is 0.01mg/m³ @ 20°C. 7 Bar g. : The removal rate of particulate pollutants is 0.01 (micron). Example 4: 004s = kh004h.

Remarks

We can quote separately according to customers' requirements.

Movies

● The teaching of how to use the tool to disassemble precision filter. ● Please pay attention to the direction. ● When removing the filter, please rotate it to the right. ● After remove the outer shell of the filter. ● There is a filter element. ● We can unscrew the nut with a wrench or your hand. ● Disassemble the filter element of the precision filter.

Teach how to install the filter element of Dolomann replacement for HIROSS filter. When installing, please make sure that the O-ring above must be airtight. If it is not, please make sure that your hands are clean. If not, please cover it with a clean cloth and take it with your hands, because it won't pollute the filter element when you lock it, and then install it in. Then you only need to top it up. At this time, use the basic screw cap attached to the box in its packaging to lock from the screw teeth below, and locked by hand. Before Install your precision filter tank., the screw teeth can be coated with a little Vaseline. Because of the corrosion caused by water, it can't be smeared inside. Just smear it on the teeth. Tighten it by hand (the locking direction is to rotate to the right side of the person). because there is an O-ring inside which has airtight effect, so the installation of the precision filter element is completed!