Replacement for PARKER EcoPure Air Compressor Filter Element

In 2004, we won the Taiwan Excellent Award and certificated the ISO 9001. Our company makes efforts to enhance the professional knowledge about the compressors and the plans of our factory.

Menu

Best Sale


Replacement for PARKER EcoPure Air Compressor Filter Element

Dolomann Replacement for PARKER EcoPure Air Compressor Filter Element can separate impurities such as oil drops, water drops or solid particles in gas. The moisture remaining in the air will condense when the temperature falls down, thus blocking the air flow and even leading to pipeline broken. If oil and water in the air are not effectively removed, they will form acidic sludge, which will shorten the components 'service life and need to be repaired or replaced in advance.

Air compressor Ultra-precision filter element

There are about 10 common pollutants in the air compressor system, the air compressor can be effectively used after these pollutants need to be removed or reduced to an acceptable level.

  • Atmospheric dust
  • Rust
  • Pipe spalling
  • Steam
  • condensation water
  • Water mist (aerosol)
  • Liquid oil
  • Oil mist (aerosol)
  • Microorganisms
  • Oil vapor

Mature technology keeps reliability and high efficiency.

The air flow in the air compressor flows from inside to outside, and the pollutants are captured by filter material and condensed into large droplets, which eventually get to the lower end of the filter and discharged by gravity.

The filter element inner surface is used as pre-filter to remove large particles of pollutants, while the small inner hole is used to remove aerosols and solid particles. The larger holes on the outside can allow air to pass freely and minimize the pressure drop.

The space between the filter element outer diameter and the housing inner diameter must be properly sized to reduce the air velocity and the possibility of oil and water entrainment.

Dolomann replacement for PARKER precision filter element has a high and reliable quality, all types can be customized, welcome to contact us.

The pollutants in the air compressor mainly include water, oil, dust, microorganisms and so on. These pollutants will cause the product defects and maintenance costs. For example, in the process of automobile painting, tiny impurities in the air will make the painting sag. Most problems of air compressors are caused by pollutants.

Features

  • 100% made in Taiwan.
  • Filter material: Use glass fiber imported from German.
  • Inner and outer mesh materials: Made of SUS-304 stainless steel.
  • The outermost layer is added with a layer of white non-woven fabric, which will not be damaged or cause 2nd degree pollution and blockage.

Regular maintenance to obtain stable air compressor quality and high efficiency.

People used to replace the filter element according to the pressure drop, because the pressure drop directly affects the operation cost.

However, it must be noted that the primary purpose of installing compressed air filters is to remove pollutants in compressed air. The replacement frequency of filter element should comply with the manufacture’s operation manual to get the high-quality compressed air.

Why need to replace the filter element regularly.
  • Keep high-quality compressed air.
  • Adsorption layer of protective adsorption dryer.
  • Protect equipment, operators and processed.
  • Reduce the cost.
  • Improve productivity and profitability.
  • Safe to continue use.

Specification

  • Grade U=GP:The removal rate of oil (residual oil) 0.5mg/m³ @20℃ 7Bar g The removal rate of particulate pollutants is 1.0µ (micron)
  • Grade H=HE:The removal rate of oil (residual oil) 0.01mg/m³ @20℃ 7Bar g The removal rate of particulate pollutants is 0.01µ (micron)
Specification Table

The flow rate in the table refers to the capacity of compressed air under the suction condition of 20°C,1bar(a),relative humidity of 0% and rated working pressure of 7bar g(100 psi g). Application reference the coefficient of correction under other working pressures.

Type Port size Flow rate Compatible to Parker type Quoted price
m³/min m³/hr scfm l/sec
05-EPK006 1/4" 0.6 36 21 10 006  
05-EPK010 1/2" 1 60 36 17 010 5000
05-EPK020 3/4" 2 120 72 34 020 5200
05-EPK030 1" 3 180 106 50 030 5800
05-EPK045 1" 4.5 270 161 76 045 6000
05-EPK060 1" 6 360 216 102 060 7200
05-EPK080 1 1/2" 8 480 286 135 080 8300
05-EPK100 1 1/2" 10 600 360 170 100 9300
05-EPK120 1 1/2" 12 720 432 204 120 11500
05-EPK150 2" 15 900 540 255 150 13500
05-EPK180 2" 18 1080 646 305 180 14500
05-EPK210 2" 21 1260 754 356 210 15500
05-EPK250 3" 25 1500 898 424 250 18500
05-EPK350 3" 35 2100 1257 593 350 19500
05-EPK400 3" 40 2400 1437 678 400 20500
Correction of coefficient
Operating pressure Pressure correction of
coefficient (CFP)
bar g psi g
1 15 0.38
2 29 0.53
3 44 0.65
4 58 0.76
5 73 0.85
6 87 0.93
7 100 1.00
8 116 1.07
9 131 1.13
10 145 1.19
11 160 1.25
12 174 1.31
13 189 1.36
14 203 1.41
15 218 1.46
16 232 1.51

Quality standard and application of compressed air.

Air compressors are widely used from pharmaceutical process to pneumatic tools. We have provided you with some system solutions for air compressor purification, which may meet your needs.

ISO8573 It is an international standard for compressed air quality, and has become a standard method for specifying the cleanliness of compressed air in the industry.

Remarks

We can quote separately according to customers' requirements.