Air Compressor White Iron Precision Filter
SUS-304
Dolomann air compressor whiter iron precision filter is used for medial grade and food grad special filter, and its shell is made of SUS-304 stainless steel, which has good formability, weld ability and high corrosion resistance, and long service life. The white iron precision filter shoulders an important cleaning task in the air compressor. The function of the precision filter is to separate the moisture, oil pollution and impurities in the air of the air compressor. Only when the air of the air compressor is filtered by the precision filter can the air quality without impurities be produced. The precision filter can not only guarantee the production quality of the products, but also enable the air compressor to operate stably for a long time.
Air compressor Ultra-precision filter,Dolomann precision filter, Air compressor filtrator
Principle of Precision Filter
The biggest pollution in compressed air comes from the air sucked by the compressor, not from the compressor itself. The most troublesome pollutant is water, which accounts for about 99.9% of liquid pollutants found in compressed air. High-efficiency compressed air precision filter can not only remove solid particles and oil, but also removes water mist, which is the key to operating an efficient and cost-effective compressed air system. A typical compressed air system has various requirements for air quality.
Features
- Pressure: 10KG
- Material: Glass Fiber Imported from German
- The shell is SUS-304 Stainless Steel.
- Has excellent formability and weldability.
- Through chemical composition design, #304 material has the properties of high corrosion resistance and bright surface.
| Major Component | Ni | Cr | Mn | C |
|---|---|---|---|---|
| 8.00 ~ 10.50 wt% | 18.00 ~ 20.00 wt% | ≤ 2.00 wt% | ≤ 0.08 wt% |
Corrosion Resistance: The main corrosion resistance of stainless steel come from the passivation film formed by adding Cr element, and the passivation film can be stabilized by adding Ni element. In general environment, #304 material has excellent corrosion resistance.
Specification
- Grade C: Oil Removal Rate (oil residual volume) 0.003mg/m³ @20°C. 7 Bar g.
- Grade P: Particulate Pollutants Removal Rate 5u (micron).
- Grade U: Oil Removal Rate (oil residual volume) 0.5mg/m³ @20°C. 7 Bar g. Precision Particulate Pollutants Removal Rate 1.0u (micron).
- Grade H: Oil Removal Rate (oil residual volume) 0.01mg/m³ @20°C. 7 Bar g. Precision Particulate Pollutants Removal Rate 0.01u (micron).
Specification Table
Filter Precision| Material | Multilayer Glass Fiber Filter Element | Multilayer Glass Fiber Filter Element | Multilayer Glass Fiber Filter Element | Active Carbon Filter Element |
|---|---|---|---|---|
| Filter Impurities | 3 MICRON | 1 MICRON | 0.01 MICRON | 0.01 MICRON |
| Oil Filter Content | 3 PPM | 0.5 PPM | 0.01 PPM | 0.003 PPM |
| Maximum Pressure | 10 KG/CM² | 10 KG/CM² | 10 KG/CM² | 10 KG/CM² |
| Maximum Temperature | 65°C | 65°C | 65°C | 65°C |
| General Pressure Difference | 0.2 KG/CM² | 0.17 KG/CM² | 0.275 KG/CM² | 0.07 KG/CM² |
| Maximum Pressure Difference | 0.7 KG/CM² | 0.7 KG/CM² | 0.7 KG/CM² | 0.7 KG/CM² |
| Function | A large amount of air and oil in air compressor is filtered to less than 3PPM and impurity particles are filtered to 3MICRON. | Air and oil in air compressor is filtered to less than 3 PPM and impurity particles are filtered to 3 MICRON. | A small amount oil and air in air filter is filtered to 0.01PPM, and impurity particles in air can be filtered to 0.01MICRON, which meets the oil-free standard of high-quality air filter. | Filtered out the odor, very fine air-oil and ultrafine particles in air filter. |
Remarks
We can quote separately according to customer's requirements.